This must be the callsign without any attachments
An optional terminal ID may be configured at the 8th position (A-Z).
'red' callsigns have not been registered.
Callsign and terminal ID must be registered to work in a trust network!
This is the callsign of the repeater where this transmission was received.
Module ID at 8th position:
This is usually the callsign of the gateway where the transmission was transferred to the internet.
Gateway-ID 'G' at the 8th position.
- User-Callsign for callsign routing
- '/' followed by callsign and repeater module at the 8th position for area routing
- 'CQCQCQ' when using reflectors.
This field is empty if not reported or the transmission was not sent via the network.
Click reflector call to get user list.
- t: time in sec
- S%: Silence frames in %
- Err%: bit error rate in %
1 2018-08-15 21:06:15 WB0HHM__ 5100 W0ZWY__B W0ZWY__G CQCQCQ__ ________ Ray_Sioux_Falls_SD__ 1080/21.6/0.0/0.0 2 2018-08-13 01:05:44 KD0QYR__ 5100 W0ZWY__B W0ZWY__G CQCQCQ__ ________ Dustin_-_Sioux_Falls 205/4.1/0.0/0.0 3 2018-07-17 22:08:18 KD0ZP___ GLEN W0ZWY__B W0ZWY__G CQCQCQ__ ________ ____________________ 155/3.1/0.0/0.0 4 2015-07-26 05:37:18 K0AAX___ ID51 W0ZWY__B W0ZWY__G CQCQCQ__ REF053_A Paul-Sioux_Falls_SD_ 40/0.8/0.0/0.0