LastHeard

Nr.	Date/Time (UTC)Timestamp of report(UTC)	CallsignCallsign of the UserThis is important for routing! This must be the callsign without any attachments An optional terminal ID may be configured at the 8th position (A-Z). 'red' callsigns have not been registered. Callsign and terminal ID must be registered to work in a trust network!	IDID4 digit user defined text	Rptr1Repeater 1Field from DSTAR header. This is the callsign of the repeater where this transmission was received. Module ID at 8th position: 'A': SHF/23cm 'B': UHF/70cm 'C': VHF/2m	Rptr2Repeater 2Field from DSTAR header. This is usually the callsign of the gateway where the transmission was transferred to the internet. Gateway-ID 'G' at the 8th position.	UrCallDestination CallsignRouting destination: - User-Callsign for callsign routing - '/' followed by callsign and repeater module at the 8th position for area routing - 'CQCQCQ' when using reflectors.	Dest RptrDestination RepeaterCallsign of the repeater or reflector to which this transmission was sent. This field is empty if not reported or the transmission was not sent via the network. Click reflector call to get user list.	TX-MessageTX messagemax. 20 characters user defined text	Fms/t/S%/Err%Statistic of the transmission:- Fms:number of frames - t: time in sec - S%: Silence frames in % - Err%: bit error rate in %
1	2014-12-02 10:34:32	OZ9ED___	IC92	OZ9DST_B	OZ9DST_G	CQCQCQ__	DCS004_B	OZ9AL_/_PORTABmL____	246/4.9/0.0/0.1
2	2014-10-20 09:35:03	5Q9D____	2820	OZ9DST_B	OZ9DST_G	CQCQCQ__	________	1Q9D/MOBIL__________	43/0.9/0.0/5.4

Total available records: 2

• Refresh